For a long time, we have been used to hanging curtains using a rod that is drilled into the wall. However, with changing times, there are different ways to go about it without using the traditional curtain rod.
There are various ways that you can hang curtains without using a curtain rod and still have them serve their purpose. Are you wondering how this is possible? We shall be discussing that in this article.
Hanging curtains without a rod ideas
- 1. Hang curtains without a curtain rod by using ropes
- 2. Hang curtains using a tension rod
- 3. Use a curtain wire
- 4. Hanging curtains using drawer pulls
- 5. Use a tension cable
- 6. Hang curtains without curtain rods by using nails
- 7. Magnetic curtain rod
- 8. Use a tree branch
- 9. Command hooks
- 10. Using copper pipes
- Tips for hanging curtains without curtain rods
- Frequently asked questions
1. Hang curtains without a curtain rod by using ropes
This is one of the most common ways to hang curtains without the need for a rod. However, you will have to find ways of how you can create tension since ropes don’t stretch.
The rope can be used for curtains that don’t have eyelets or grommets although you will have a hard time pushing the rope through the space where the rod should be. In such a case, the alternative would be to use a thin rope.
This might however not be the best option because thin ropes are not strong. Generally, if you are into using a rope to hang curtains, use it on the curtains that have eyelets or grommets. Here is a creative guide on how to hang curtains using a rope.
- Fix the rods brackets at the furthest right and left side of the window frame. You can drill holes in the wall using a drill.
- Use a bowline knot and tie the rope to one of the brackets. Ensure the knot is well tied and secure.
- Pass the other end of your rope through all the curtains’ grommets and stretch it, and tie another bowline to the other hook of the curtain rod.
2. Hang curtains using a tension rod
A tension rod is another great way to hang curtains without rods. It is a versatile tool and you can hang either large or small curtains using it. Installing and removing it is easy because you don’t need any hardware to do so. Here are the steps to installing a tension rod.
- Measure the space where you want to hang the curtains. The tension rod has to be placed between two surfaces that are hard and flat.
- Push your curtains through the tension rod and ensure the whole curtain is covered without the ends being trapped.
- The other alternative is to slide the rings of the curtain into the tension rod and hang the curtains using the rings later.
3. Use a curtain wire
You can avoid the struggle that comes with using curtain rods by going for curtain wires. Their functionality is the same as that of a curtain rod.
Nevertheless, the wires can only be used on small holes if you want to maintain a good look on your walls. Among the things that you will be required to have include
- Electric drill
- Wire cutters
- A drill bit
- Electric drill
Armed with the above, follow the following steps and hang curtains without rods.
- Fix one of the eye hooks into the net wire in an anticlockwise direction
- Insert the drill bit into the drill and ensure only 8mm is on the outside. This prevents deep drilling or permanent damage to the window frame.
- Drill a hole in the window frame’s top right corner.
- In a clockwise direction, screw a hook
- Repeat the third and fourth steps with the window frames’ top right-hand corner.
- Use one of the hooks to loop the eye that was inserted into the wire.
- In a straight line, pull the wire towards the hook on the other side of the window in a straight line.
- Use wire cutters to cut the wire at least 2 inches from the other hook
- Twist the remaining eyelet on the other end of the wire.
- Loop the remaining end across with the other hook but first, ensure it is well stretched.
- You can drill an extra hole into the center of the window frame and fix a hook in it.
- Insert the net wire inside the hook.
All the above is done to ensure that the foundation is stable. After this, you should pull the wire out of the stitching rows on your curtains where you are supposed to run a rod.
Place it back on the hooks. Nevertheless, you need to properly cut the curtain wire to give the curtains a good tension. Also, if you don’t want your curtains to sag, consider using a standard wire with an extended length.
4. Hanging curtains using drawer pulls
This is another great way of hanging curtains without the need for rods. Most hardware stores have them in the kitchen section. However, the drawer pull of your choice must match the size of the eyelet hole in your curtains so it fits in perfectly.
The good thing about drawer pulls is that they are available in many styles from modern to traditional to contemporary.
They also come in many colors and therefore you will get something that adds to your home’s decor. You will not have to worry if you have a traditional curtain as it will blend well with drawer pulls. These units are screwed directly into the wall.
5. Use a tension cable
Whether you have grommeted, ring-clipped, or rod pocket curtains, tension cables will hang your curtains well. They are the best for hanging lightweight curtains or sheers more so if your window frame is expansive.
Some retail stores sell a package containing all the required curtain hanging accessories. They include 2 wire clamps, 2 wall hooks, 2 turnbuckles, and a wire cable. Here is the way to hang curtains using a tension cable.
- Screw the curtain hooks into the wall, one on each side of the window opening.
- Create loops at the ends of the tension cable and use wire clamps to tighten them. Each loop should be at least 5 to 7 inches.
- Pass the wire through the curtain’s rod pockets, grommets, or tabs.
- Anchor each end of the turnbuckles to the hooks and tension cable.
- Cut off the excess wire and properly tighten the turnbuckles.
6. Hang curtains without curtain rods by using nails
If you want to save on space and keep things simple, the use of nails is one of the best ideas. It works perfectly for curtains made using light materials.
However, you should choose nails that are long enough to make it easy for you to drape the curtain over each of them directly.
In this idea, you start by screwing the nails into the wall in a straight line. This gives you the option of hanging the curtains in a straight line or allowing them to hang between the nails.
7. Magnetic curtain rod
If your windows or doors are metallic, this is one of the best ways to hang curtains. Magnetic rods are easy to use since they install themselves thus making them the most convenient idea for hanging curtains. You will easily open and close the curtains with this idea without them falling off. Also, it will be easier for you to pull the magnetic rod off in case you want to relocate.
However, you might have a hard time getting the right color and style since they are limited, unlike the traditional curtain rods.
8. Use a tree branch
Sometimes going natural is awesome and if it is your thing, you should try hanging curtains with a tree branch.
Although you might not be able to shape the branch perfectly, it will still add the touch of nature to your decor. All that is required is to ensure that the branch is sturdy to hold your curtains on the windows well. This is more so if you have heavy curtains.
Once you have found the tree branch of your choice, smoothen it up a bit using some sandpaper. You will also need a bracket on each edge of the window where the branch will sit on.
9. Command hooks
Using command hooks to hang curtains is a sure way of keeping your walls safe. This is because there is no drilling required.
This is a great idea more so for those who keep on moving a lot. Below is a tutorial on how to hang the curtains with command hooks.
- Buy command hooks that have a good finish
- Use rubbing alcohol and a paper towel to clean the surface where you will be fixing the command hooks.
- Mark the hook’s placement at a spacing of 3-6 inches outside the edge of the window.
- Place one command hook at the center to balance the weight of the curtains.
- Separate the hooks adhesive’s strips and press them on the hooks
- Press each hook on the wall after removing the black liners
- Leave the hooks to sit for some hours and add your curtains gently to the command hooks.
10. Using copper pipes
Copper pipes come in as another curtain hanging idea and they add a decorative look to your window. They are shiny and appealing to the eyes.
Most decor stores have copper pipes and the hardware needed to install them. The installation of the rods will not take you more than 30 minutes. Below are the steps to follow when hanging curtains using copper pipes.
- Cut the pipe to the right length of your window
- Drill holes at the top of the window or on the window casing.
- Screw the brackets into the holes
- Slip the curtain clips onto the pipe and pass the copper pipes through the openings of the brackets and remember to secure the screws.
- Attach your curtains to the clips and allow them to flow down your windows. Curtains that are hung using copper pipes for drapes thus enhancing the look of your windows.
Tips for hanging curtains without curtain rods
- Go for a drapery hung
- Use two window treatments layers to get both function and form.
- Use roller shades to control light if you will hang the curtains without a rod.
Frequently asked questions
Where should curtains be hung in relation to the window?
This depends on several factors, with your window frame being one of them. You definitely don’t want to cover it if it looks beautiful and classic.
In such a case the best option would be to hang the curtains from the inside. On the other hand, you can hang them above the frame if you want to maximize your windows.
How long should curtains be?
Floor-length is the best for curtains. However, if you want a classic and tailored look, you should let the curtains slightly touch the floor. This option will also make it easy for you to open and close the curtains.
Should curtains be wider than the window frame?
Yes. This makes the window look warm and allows enough light to pass through the curtains.
If you have been hanging curtains using rods, it’s time to embrace change. We have discussed some of the best alternatives to hanging curtains without rods and they are all simple. Besides, they eliminate the risk of damaging your walls through drilling holes.
The methods discussed are suitable for different types of curtains. They are also not cumbersome making them the best if you like changing your home decor frequently.
Some methods are for heavy curtains while others are for light ones. Before using some of the discussed methods, you need to measure the size of your window. We hope this article has been helpful.